THE BEST ENERGY IS THE ENERGY WE SAVE.
Saving energy has always been important, but currently the effects of high energy consumption are particularly noticeable. Climate change and high energy prices are just two significant factors. As an energy-intensive manufacturer, we know what we are talking about and we are aware of how important it is to save electricity and energy sources as much as possible.
PP-R (polypropylene) pipes have many advantages over steel or copper pipes when it comes to saving energy.
Consistent pumping performance, good insulation.
The great advantage of POLYMELT polypropylene piping systems: The smooth inner pipe walls prevent deposits and corrosion cannot take place. This means that the pipe cross-section and the required pumping capacity always remain the same. Loss of output due to deposits is virtually eliminated. Thus, the required energy remains the same - even after decades. In addition, PP-R has inherent heat and sound insulating properties.
How PP-R pipes help save energy.
- Low thermal conductivity (0.24 W/mK, for comparison: steel approx. 60 W/mK, copper 380 W/mK)
- No deposits or corrosion: increasing pump energy does not have to compensate for the smaller cross-section
- Corrosion additives are not required
- Low maintenance costs
- Total cost of ownership lower than for metallic pipes
Pre-insulated pipes: The efficient method to maintain temperatures over longer distances.
POLYMELT's pre-insulated pipes are insulated with rigid PUR foam, which is enclosed in a jacket pipe for additional protection. This allows hot water, drinking water as well as heating or cooling water to be transported over longer distances with low losses. In this way, buried pipes made of PP-R become real energy savers.
How pre-insulated pipes help to save energy.
- Very low thermal conductivity (approx. 0.024-0.035 W/mK)
- No deposits or corrosion
- No addition of corrosion additives necessary
- Very low maintenance costs
- Lower total cost of ownership than comparable lines
The POLYMELT PP-R pipes for saving energy.
POLYMELT PP-R pipe systems are ideally suited for a wide variety of applications. Whether heating construction, air conditioning or refrigeration technology, drinking water supply, service water systems or industrial plant supply. With POLYMELT polypropylene pipe systems, installation effort and operating costs can be significantly reduced.
The ECOSAN installation system with pipe diameters from 20-250 mm consists of different pipes for different applications and guarantees a perfect supply.
The POLYMUTAN installation system consists of various pipes with pipe diameters from 20-110 mm for different applications and guarantees a perfect supply.
The MECHANICAL pipe system made of PP-R offers a corrosion-resistant and durable solution for water transport in closed cooling or heating water systems for residential and commercial buildings, such as hotels and shopping centers, as well as for technical cooling or heating purposes in industrial buildings.
The UV system is specially designed for applications where the pipes are exposed to UV radiation. Therefore, the UV system is particularly suitable for outdoor installation, such as in drinking water systems and irrigation systems.